Washer Machines

Common problems with Washing Machines

What is wrong with my washing machine? Why has it stopped working again? From making loud noises to spinning out of control, learn about the most common washing machine problems. Have you ever found your washing machine is not draining properly? Or everything was working great and then it just started making loud noise? Or do you keep finding leaks? These are quite common problems with washing machines.

Clothes not clear!

One of the most common problems with washing machines is finding your clothes are not clean. This is often due to your washing powder or detergent not reaching your clothes due to being blocked. Usually caused by faulty washing machine parts; blocked drain pipes or clogged filters can cause the detergent molds and gunk to build up and travel down to your clothes.

Not spinning!

Another problem which washing machine owners face is the machine not spinning. Overloading your machine can put pressure on its parts, stopping it from spinning. But another cause could be the drive belt. You can do the belt spin test yourself to see whether the washing machine part needs replacing or not. Open your door and spin the drum. Some resistance is normal, but if your drum spins very easily, the drive belt needs to be replaced.


Whether your washing machine buzzes or vibrates, excessive noise is usually an indication of washing machine parts being faulty. Letting it continue making loud noises will make it worse and break the entire machine down completely. Again, it could be worn out or a fault machine drum, some form of obstruction in the inner or outer drum like coins or objects left inside pockets, etc.

Washing machine will not turn on!

There are a number of reasons why your machine is not working properly. From the power supply being obstructed by a faulty circuit to the motor not working; washing machines not turning on is quite a hassle. The first step to find out why the machine is not turning on is to check the power supply. If electricity is not flowing to the machine, checking the electricity panel in your house will allow you to see if the circuit is broken or not. An electrician can fix that. However, the most common reason people explain is the motor being faulty. Motor is the main function of a washing machine part. If it overheats, it will stop and wait till it has cooled down before it will begin its cycle again. But if this is happening more often than usual, then you will have to consider replacing the motor.


The messiest of all problems. Sometimes the issue is just connecting the hose and making sure it is secure. But most often it cracks and damages in the drainage pipe. Check where the drainpipe is attached to the machine to see if there are any small cracks which could be causing the leak. If it is, you can just cut the end part and re-clamp it back in place. However, replacing it completely is always advised. Although not common, the fill hose could also be the cause of mess. Worn out rubber washers can make the fill hose insecure which then causes water to leak.

For further information and on how to fix these problems, please visit www.usapartsandmore.com

Leave a Reply

Your email address will not be published. Required fields are marked *